SOLUTIONS

EcoSEC HT Column Switching Valve

EcoSEC HT Column Switching Valve Option 

The EcoSEC High Temperature GPC system contains two pumps, a sample pump to deliver sample and solvent through the column, the other pump is designed to flow solvent (via a reference column) to the reference cell of the RI detector. By installing an optional column switching valve and replacing the reference column with another analytical column, an analysis can be performed on column 1, while equilibrating column 2. After switching the valve, column 2 becomes the measurement column, while column 1 will be in the flow path to the reference cell.

The illustrations below show the sample being transported to column 1, while the reference pump delivers solvent via column 2 to the RI reference cell. After switching the valve, the sample flow is directed to column 2, while column 1 now acts as the reference column. The column switching valve consists of two 4-port valves. In the figure below a simplified schematic with one valve is used to illustrate the principle operation of this optional device.

The optional column switching valve shortens the time needed to perform an analysis of the same sample on, for instance, a low and high molar mass linear column, or to analyze the same sample on two different column types using a single solvent.

A: Flow path with column 1 as the analytical column

Column_switching_valve_FigA.png 

B: Flow path with column 2 as the analytical column  

Column_switching_valve_FigB.png